Allison 1000 Front Pump Seal, Torque Converter | 2001-2019
Allison Transmissions
- SKU:
- 29546682
The Merchant Automotive Allison 1000 Front Pump Seal seals the torque converter hub where it enters the front pump on 2001-2019 Chevy Silverado and GMC Sierra 2500HD and 3500HD trucks with the Duramax diesel and the Allison 1000 six-speed automatic. GM catalogs it as the torque converter fluid seal, and it is often called the converter seal or front seal. It replaces Allison 29546682 and the earlier numbers 29536299, 29545376 and 29540309.
Features
- Seals the torque converter hub (snout) to the front pump
- Replaces Allison 29546682, 29536299, 29545376 and 29540309
- Fits every Duramax generation behind the Allison 1000: LB7, LLY, LBZ, LMM, LML and L5P
- Also included in our Allison 1000 Converter Housing Reseal Kit
Why Replace It
A leaking front pump seal drips transmission fluid from the bottom of the bell housing, between the engine and the transmission. Left alone, the fluid level drops and the transmission can slip or run hot. Because the transmission has to come out to reach this seal, it is smart to replace it any time the converter is removed for a converter swap, a rear main seal or a flexplate job.
Installation Tips
- Remove the transmission and the torque converter to reach the seal.
- Pry out the old seal without scratching the pump bore.
- Check the converter hub for grooves or wear where the seal rides. A worn hub will cut a new seal.
- Check the Allison 1000 Front Pump Bushing. A worn bushing lets the hub wobble and the new seal will leak again. Our Allison 1000 Pump Bushing Installer/Removal Tool makes that job easier.
- Coat the seal lip with clean transmission fluid and drive the seal in straight and evenly with a properly sized driver.
- When reinstalling the converter, make sure it fully engages the pump before bolting the transmission to the engine.
Related Parts
- Allison 1000 Converter Housing Reseal Kit
- Allison Converter Housing Seal
- Allison 1000 Pump Housing Gasket
- Allison 1000 Converter Housing Gasket
- Converter Housing Bolt Seal Set, Allison 1000
FAQ
Is the front pump seal the same as the torque converter seal?
Yes. The front pump seal is the seal the torque converter hub rides in, so it is commonly called the converter seal or front seal.
How do I know if the front pump seal is leaking and not the rear main seal?
Both leak at the bell housing. Transmission fluid is red or pink when fresh and thinner than engine oil, while engine oil is brown or black. Checking the color and feel of the fluid at the drip point is the quickest way to tell them apart.
Do I need to remove the transmission to replace it?
Yes. The seal sits in the front pump behind the torque converter, so the transmission and converter must come out.
Should I replace anything else while I am in there?
Check the front pump bushing and the converter hub. Many people also replace the converter housing seal and gaskets at the same time, which are all included in the Allison 1000 Converter Housing Reseal Kit.
Does it fit 2020 and newer trucks?
No. 2020 and newer Duramax pickups use the Allison 10L1000 ten-speed, which uses a different seal.
For warranty information or to submit a claim, see our Warranty Form.