Thermostat Housing Kit, 2006-2010 Duramax LBZ/LMM
$474.33 - $522.83
Add to Cart
The item has been added
Upper Coolant Pipe, for 2006-2010 Duramax LBZ/LMM
$144.53 - $168.78
Add to Cart
The item has been added
Add to Cart
The item has been added
The Merchant Automotive Rubber Fuel Hose Kit replaces all six rubber low-pressure fuel hoses on 2006-2010 Chevy Silverado and GMC Sierra 2500HD and 3500HD trucks with the LBZ and LMM 6.6L Duramax diesel. Each hose is molded to the factory shape and built for diesel fuel, so you can replace every hardened or cracked hose in one job.
Features
- Complete set of six molded rubber fuel hoses
- Built for diesel fuel
- Molded to the factory shape for a direct fit
- Covers the fuel filter, injection pump, fuel rail and fuel return hoses
- Clamps are not included. Reuse your factory clamps or install new ones.
What's Included
- (1) Fuel Rail to Fuel Return Hose, replaces GM 97321375
- (1) Fuel Return Hose, Fuel Feed Manifold to Return Pipe
- (1) Injection Pump Return Hose, replaces GM 12625278
- (1) Injection Pump Inlet Hose, replaces GM 12625277
- (1) Fuel Inlet to Filter Hose, replaces GM 12625281
- (1) Fuel Outlet to Filter Hose, replaces GM 12625284
Why Replace Them
Factory rubber fuel hoses harden, swell and crack with age and engine heat. A failing hose can leak fuel, leave a diesel smell under the hood, or let air into the fuel system. Air in the fuel can cause hard starts, rough running, loss of power or the need to re-prime after a fuel filter change. When one hose fails, the others are usually close behind, so replacing the full set at once saves you from chasing leaks one hose at a time.
Installation Tips
- Relieve fuel pressure and disconnect the batteries before removing any fuel hoses.
- Replace one hose at a time to keep the routing correct.
- Inspect the clamps and replace any that are rusted or weak.
- Prime the fuel system after installation and check every connection for leaks.
Frequently Asked Questions
Are clamps included?
No. Reuse your factory clamps if they are in good condition, or install new ones.
Does this fit Kodiak or TopKick trucks?
No. This kit fits 2006-2010 Silverado and Sierra 2500HD and 3500HD pickups only.
Can I buy the hoses individually?
Yes. Every hose in this kit is also sold separately. Use the links in the What's Included list.
Do I need to prime the fuel system after installing?
Yes. Prime the system after replacing the hoses to remove any air before starting the engine.
For warranty information or to submit a claim, see our Warranty Form.
