MAHLE Clevite Cam Bearing Set, Duramax LB7-LML | 2001-2016
The MAHLE Clevite SH-1999S is a complete camshaft bearing set for the 2001-2016 6.6L Duramax, covering the LB7, LLY, LBZ, LMM and LML. Cam bearings carry the camshaft journals in the block and are replaced during a full engine rebuild or block machining, once the old bearings are driven out. One set does one engine.
Key Features
- MAHLE Clevite part number SH-1999S
- Bimetal construction: seamless steel tube back with a lead-based babbitt bearing layer, nominally .020" thick
- Centerless-ground O.D. and bored I.D. hold wall variation to .0004"
- Finished to the recommended running clearance, ready to install
- Standard size: shaft diameter 2.3988"/2.4000"
- Bearing O.D. / housing bore: 2.5590"/2.5602"
- Complete set for one engine
Benefits
Worn cam bearings let the camshaft run with too much clearance and can drop oil pressure, so they belong in any Duramax rebuild where the block is stripped and cleaned. Tight wall-thickness control keeps the installed clearance consistent from journal to journal, and the babbitt layer can conform to small imperfections and hold small debris instead of passing it to the camshaft. Replacing the full set at once keeps every journal at the same clearance.
Fitment
Fits 2001-2016 Chevrolet Silverado and GMC Sierra 2500HD and 3500 with the 6.6L Duramax: LB7 (2001-early 2004), LLY (2004.5-early 2006), LBZ (2006-early 2007), LMM (2007.5-2010) and LML (2011-2016). One set is needed per engine.
What's Included
- (1) MAHLE Clevite SH-1999S camshaft bearing set, standard size