• Home
  • -
  • Engine Seal Driver Kit, 2001-2016

Engine Seal Driver Kit, 2001-2016

3 Reviews
SKU: 10371

Earn 19999 Boost Points


When it comes to installing the front and rear main seals on your Duramax Diesel engine, you are going to need the right tools for the job. Without the correct tools, you can misalign your seals, causing future leaks that will need to be addressed. Merchant Automotive has recognized the need for a specialty tool for this job and has developed the Merchant Automotive Duramax engine seal driver kit.

This kit features two engine seal drivers, one for the front main seal and one for the rear main seal. These drivers fit over the seal and allow you to use a rubber mallet to tap the seal into place with ease. Each driver features a lip that automatically sets the correct depth of the seal once it is tapped in. This means you can install your front and rear main seal with very little chances of making mistakes.

Each seal driver is finished in a black finish with white lettering. The drivers are labeled front and rear and will feature an MA logo to showcase your favorite Duramax parts supplier. Pick up this engine seal driver kit today to keep in your toolbox to make your engine seal jobs much easier.


  • Simplifies Engine Seal Installation
  • All In One Kit
  • Automatic Depth Setting


  • Includes Front/Rear Main Seal Drivers
  • Black Finish With Front/Rear Labels
  • Built To Last

Kit Includes

  • Front Main Seal Driver, Duramax #10328
  • Rear Main Seal Driver, Duramax #10330


Make: Silverado, Sierra w/6.6 L V8 or Duramax Diesel
Model: 2500HD, 3500HD
Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010

Ratings & Reviews

3 Reviews

  • 4 stars
  • 0 reviews
  • 3 stars
  • 0 reviews
  • 2 stars
  • 0 reviews
  • 1 star
  • 0 reviews


Phil - | 04/19/2018 12:01:00 pm

In this Business it’s nice to communicate with someone like these guys that know what there doing and about what your working on. Time is money! Quick to get my parts ordered and on there way. And it’s right when I get them. 5 star ?? shop in my book

Amazing product

Tommy - | 11/07/2017 12:01:00 pm

Made building my street block 10x easier with no trouble when i usually have to struggle with a wood block and hammer. Super easy to use and accurate every time

Great product

Tim N - | 07/30/2017 12:01:00 pm

Works like a dream. Just like the video shows you just put the new seal in place and drive it home with a plastic dead blow hammer. I put red Loctite on the seals since they are a two piece design. What they don't tell you is the bolts holding the fly wheel on are extremely tight. I had to use a one inch impact to remove them and to tighten them up. Even with the one inch impact two of the bolts would not loosen. I used a 3/4 inch breaker bar with a six foot pipe to remove them. Outstanding customer service. They were on backorder and they had the supplier drop ship them to me.