null Skip to main content

CP3 High Flow 1/2 in. Feed Line Kit, Duramax | 2001-2010

Merchant Automotive

$59.92
SKU:
10335
Adding to cart… The item has been added

CP3 High Flow 1/2 in. Feed Line Kit, Duramax | 2001-2010

Any restriction in fuel flow costs horsepower. This CP3 High Flow Feed Line Kit eliminates the restriction of the factory fuel test port / fuel block on 2001-2010 Duramax LB7, LLY, LBZ and LMM engines by re-routing fuel from the fuel filter housing directly into the CP3 injection pump. The large 1/2-inch hose, used with the included CP3 pump inlet fitting, allows increased fuel flow to the pump. It's recommended for dual fueler installs and for single CP3 setups where additional flow is needed.

Key Features

  • Bypasses the factory fuel test port / fuel block
  • Feeds the CP3 directly from the fuel filter housing
  • Large 1/2-inch feed hose for increased flow
  • Includes the CP3 pump inlet fitting
  • DHD 700-102

Benefits

A built Duramax or a dual CP3 setup can ask for more fuel than the factory feed path delivers. Removing the restriction at the test port block and stepping up to a 1/2-inch line helps keep the CP3 fed under high demand, so the pump isn't starved at high RPM and load.

Frequently Asked Questions

Do I need this on a stock truck?
It's designed for dual fueler installs and single CP3s where additional flow is needed. A stock truck with a healthy lift pump usually doesn't need it.

Can I buy just the 1/2-inch fitting?
Yes. See the 1/2" CP3 Feed Fitting, Duramax | 2001 - 2010.

Will it fit my LML?
No. This kit is for 2001-2010 Duramax engines with the factory CP3 pump.

Fitment

Fits 2001-2010 Chevrolet Silverado and GMC Sierra 2500HD and 3500 with the 6.6L Duramax LB7, LLY, LBZ or LMM.

What's Included

  • (1) CP3 pump inlet fitting
  • (1) 24-inch length of 1/2-inch hose
  • (1) 1/2-inch fitting

For warranty information, see our Warranty Policy.