2" Wheel Spacers, 8 on 6.5", Pair | 2001-2010

Merchant Automotive 2" Wheel Spacers move each wheel out two inches on single rear wheel 2001–2010 Chevrolet Silverado and GMC Sierra 2500HD/3500HD trucks. They give a noticeably wider stance and more clearance between the wheel and the brake calipers or suspension parts, which helps with aftermarket wheels and larger tires. These are bolt-on, lug-centric spacers. Each spacer bolts to the hub on the factory studs, and the wheel then mounts to the studs built into the spacer and is centered by its lug nuts. They fit the 8 on 6.5" (8 × 165.1 mm) bolt pattern used on 2001–2010 HD trucks. Sold as a pair. Not for dually (dual rear wheel) trucks.

Key Features

• 2" (50.8 mm) thick
• Bolt-on, lug-centric design with studs built into the spacer
• Fits the 8 on 6.5" (8 × 165.1 mm) bolt pattern
• Sold as a pair, for one axle
• 1-year warranty

Benefits

• Pushes the wheels out 2" for a wider, more aggressive stance
• Adds clearance for aftermarket wheels, larger tires, big brakes or suspension components
• A cheaper way to change wheel position than buying new wheels with a different offset

Installation Note

• The factory wheel studs may need to be trimmed so they don't stick out past the face of the spacer and keep the wheel from sitting flat.
• Torque the spacer to the hub and the wheel to the spacer to spec.
• Re-torque the spacer after the first 100 miles. You'll need to remove the wheel to reach the spacer's nuts. Re-torque the wheel's lug nuts when you reinstall it.
• Not recommended for dually trucks.

Frequently Asked Questions

Are these spacers hub-centric?
No. These are bolt-on, lug-centric spacers. Each spacer bolts to the hub on the factory studs, and the wheel then mounts to the studs built into the spacer and is centered by its lug nuts.

Will I need to trim my factory wheel studs?
Possibly. If the factory studs stick out past the face of the spacer, they need to be trimmed so the wheel can sit flat against the spacer.

Do I need to re-torque them?
Yes. Re-torque the spacer after the first 100 miles. You'll need to remove the wheel to reach the spacer's nuts, then re-torque the wheel's lug nuts when you reinstall it.

Will these work on a dually?
No. These spacers are not recommended for dually (dual rear wheel) trucks.

How many do I need?
Each pair covers one axle. Order two pairs to space out all four wheels.

Will these fit my 2011 or newer truck?
No. These are drilled for the 8 on 6.5" bolt pattern used on 2001–2010 trucks. For 2011 and newer, see our 1-1/2" Wheel Spacers, 8 on 180 or 1/2" Wheel Spacers, which fit both bolt patterns.

Fitment

• 2001–2010 Chevrolet Silverado 2500HD / 3500HD, single rear wheel (LB7, LLY, LBZ, LMM)
• 2001–2010 GMC Sierra 2500HD / 3500HD, single rear wheel (LB7, LLY, LBZ, LMM)
• Not for dually (dual rear wheel) trucks

Need a smaller offset? See our 1-1/2" Wheel Spacers and 1/2" Wheel Spacers.

What's Included

• (2) 2" bolt-on wheel spacers, 8 on 6.5"