Front Wheel Well Liner Hardware Kit, LML Duramax
Overview
This kit has everything needed to refasten both front wheel well liners on the 6.6L Duramax LML Silverado and Sierra HD. The liners come out for many common service jobs, and the original clips and screws often break, rust or get lost along the way. This kit replaces all of them at once so the liners go back in tight, with no rattles or loose edges. It is hardware only and does not include the liners.
Key Features
- Fastens both front wheel well liners
- 14 wheel well liner panel clips
- 13 M4.2 x 20mm hex head screws with attached washers
- 5 #8 nuts
Benefits
Liner clips are made to be used once, and they rarely survive removal. Keeping this kit on the shelf means a job doesn't end with missing fasteners or a liner held in by whatever was left over. A properly fastened liner keeps road spray, salt and debris out of the engine bay and away from wiring.
Frequently Asked Questions
Does this kit include the wheel well liners?
No. It includes only the clips, screws and nuts needed to reinstall your original liners.
Does one kit do both sides?
Yes. One kit has enough hardware to refasten both front wheel well liners.
Can I reuse the original clips?
Sometimes, but most break or lose their grip when they're removed. New clips hold the liner tight and keep it from rattling or sagging.
Fitment
This is the right part if your truck is:
- A 2011–2016 Chevrolet Silverado or GMC Sierra 2500HD/3500HD with the 6.6L Duramax LML
What's Included
- (14) Wheel well liner panel clips
- (13) M4.2 x 20mm hex head screws
- (5) #8 nuts
For warranty information or to submit a claim, see our Warranty Form.
