Fits coolant bypass pipe from water pump to thermostat housing. This is the upper seal at the thermostat housing
|
The block drains on each side of the engine use this gasket on the plug to ensure no leaks. 2 required per engine
|
When installing the front cover to the block, this is the seal directly behind the oil pressure relief valve and should be replaced any time the front engine cover is installed.
|
On the 01 and 02 LB7 engines, the oil pressure switch is mounted on an aluminum stand off. These copper seals fit the banjo bolt that holds it to the block. 2 required per engine
|
Replacment O-ring on the back of the oil pump where it seals to the oil passage on the block.
|
This seal is on the end of the pipe between the water pump and the oil cooler. It can swell and be hard to reassemble properly if removed, causing a leak.
|
Used on rear engine adapter on pass side. Coolant passage block off plate
|
Replace the copper and o ring seals on one LB7 Injector
|
Upper turbo oil drain gasket.
|
SOLD INDIVIDUALLY
32 PER ENGINE
16 PER HEAD
|
Replacement Exhaust Manifold Gasket
Fits all year Duramax engines
|
HEAD GASKET - GRADE C RIGHT
|
Grade C Head Gaskets Left
|
|
Upper Radiator Pipe at Thermostat Housing
Fits all years
|
MSRP: $37.59
Price: $31.34
You Save: $6.25 (17 %)
Downpipe to Turbo Gasket
CA Emmision LB7 engine only
|
|
Molded Rubber Gasket betwen oil cooler elbow and rear cover
|
|
|
|
SOLD AS A PAIR
ORDER ONE PER ENGINE
|
Seal- Back Of Water Pump To Front Cover
|
Replace anytime the water pump is replaced
|
Replacement Banjo Seal at Relief Valve
Mounted in Valley near fuel junction block on LB7 Engine
|
Replacement Banjo Seal
Water Coolant Pipe at Turbo Charger
|
Mounts on top of water pump at bypass pipe
|
Thermostat crossover housing to cylinder head
2 required
|
Used on LB7 engines. Grommet that high pressure fuel line passes through
|
MSRP: $45.26
Price: $41.84
You Save: $3.42 (8 %)
Front Main Crank seal
|
Gasket at Oil Cooler to elbow adapter
|