Dress up your truck with this Polished Aluminum Fabricated Coolant Tank.
|
MSRP: $61.01
Price: $50.17
You Save: $10.84 (18 %)
Is your block heater working?
|
Replacement Block Heater Element.
|
Fits coolant bypass pipe from water pump to thermostat housing. This is the upper seal at the thermostat housing
|
The block drains on each side of the engine use this gasket on the plug to ensure no leaks. 2 required per engine
|
MSRP: $105.14
Price: $97.45
You Save: $7.69 (7 %)
Includes low coolant sensor
|
MSRP: $101.12
Price: $91.00
You Save: $10.12 (10 %)
OE Fan blade
|
MSRP: $262.30
Price: $236.07
You Save: $26.23 (10 %)
Is your cooling fan working? Your fan clutch may not be operating correctly
|
Factory replacement water pump with all the gaskets and seals needed to do the job.
|
Rear position thermostat is towards the fire wall
Identified by its offset design, also has bleeder valves built in
|
For use with Twin Turbo Kits in place of the plastic coolant tank!
|
Often when the water pump is removed damage is found on the inside of the cover.
|
Front thermostat is mounted in the forward position in the thermostat housing
Also identified by its symmetrical shape
|
Upper Radiator Pipe at Thermostat Housing
Fits all years
|
Molded Rubber Gasket betwen oil cooler elbow and rear cover
|
Radiator Drain Plug Fits 2001-'05 Duramax
|
Seal- Back Of Water Pump To Front Cover
|
A bad cap will not control cooling system pressure properly
|
Replace anytime the water pump is replaced
|
Mounts on top of water pump at bypass pipe
|
A common leak point on 01-05 trucks
|
Thermostat crossover housing to cylinder head
2 required
|
Gasket at Oil Cooler to elbow adapter
|
Replacement thermostat seal.
2 required for engine
|
Seal on heater pipe at thermostat housing
| | |